Stainless Steel Metal Cut to Length Line
On a stainless steel line the surface is the product. That changes the whole job. Uncoil a 200 or 300 series sheet and any bow, cross camber, slip mark or ragged edge stays printed on the panel forever; the kitchen fabricator, cabinet maker and polishing shop down the line cannot buff it out they just reject it. This stainless steel cut to length line is configured for that reality across the 550 to 2100mm series and the 0.2 to 8.0mm thickness per model handling 4 to 30 ton coils at up to 50m/min. The aim is a square clean-edge panel that comes off the line as bright as it went in not a plain carbon line adapted after the fact. What actually changes on a tuned line is contact: the leveler rolls and guide surfaces are chosen not to mark the bright finish the shear blade is set fine for a burr-free square edge and the exit table carries the panel without dragging on its face. For a processor whose reputation rides on how burr-free the cut stainless sheet arrives this metal sheet processi…
A Video Interactive Platform For Global Opportunities
Copyrights © 2026 jstmtz.com All Rights.Reserved .