www.jstmtz.com

Main Shaft Assembly for Cone Crusher  

Main Shaft Assembly for Cone Crusher

Main Shaft Assembly for Cone Crusher The steps to disassemble the crushing cone are as follows: 1.Remove the adjustment sleeve. 2. Screw the spindle eyebolt to the upper end of the spindle. 3. Use an on-site crane or lifting device to carefully lift the crushing cone crusher from the crusher. The wire rope should be lifted when the thick side of the eccentric sleeve is at an angle with the vertical direction. In this figure, use The circle marks the contact part of the main shaft and the main shaft bushing and the direction of the wire rope pulling force. The broken cone under tension or inclined is slightly biased toward the thick side of the eccentric sleeve, so that there is enough space between the seal ring on the body and the bowl-shaped bearing frame. Clearance. Lifting in this way can avoid damage to the sealing device under the body and on the bowl-shaped bearing frame. Before removing the adjustment sleeve, just pay attention to the position of the discharge port t…