www.jstmtz.com

Plug Pins Insulation Sheath Sleeve Abrasion Resistance Durability Tester Equipment  

Plug Pins Insulation Sheath Sleeve Abrasion Resistance Durability Tester Equipment

                 Plug Pins Insulation Sheath Abrasion Resistance Tester            YW-1124 Standards: Clause 24.7 and Figure 28 of GB2099.1-2008, Figure 28 of IEC 60884-1 and Figure 9 of BS1363 Application: Testing the abrasion resistance of the pin insulation sleeve of plugs Test on: Plug and pin insulation sleeve Component: A horizontal beam and a linear-motion clamp holder Functionality : At the end of the horizontal beam, there is a short steel wire bent into a U-shape with a diameter of 1mm (the two points of the U-shape are fixed vertically onto the beam), and the bottom straight edge of the steel wire U-shape measures 6mm, serving as the working section. The straight bottom edge of the U-shaped steel wire is pressed against the insulation sleeve of the pin, and an electric motor drives the clamp holder equipped…